5 shapes name
Geometric Shapes Names - English Grammar Here
English Geometric Shapes Names, Definition and Examples;
Table of Contents
Geometric Shapes List
- Nonagon
- Ellipse
- Rectangular
- Rectangular Prism
- Octagon
- Cone
- Triangle
- Scalene triangle
- Arrow
- Cube
- Cylinder
- Star
- Heptagon
- Hexagon
- Crescent
- Pyramid
- Right triangle
- Parallelogram
- Rhombus
- Square
- Pentagon
- Trapezoid
- Circle
- Oval
- Decagon
- Heart
- Cross
(For much more shapes names)
Geometric shapes can be named as figure or area closed by a boundary which is created by combining the specific amount of curves, points, and lines. There are different geometric shapes are Triangle, Circle, Square, etc. It is very important that you acquire the necessary understanding of the geometric shapes. For example; the common shapes in geometry like are square, rectangle, circle, and triangle. Here are some of geometric shapes and definition;
A square is a four-sided area which is created by connecting 4 line segments. The line segments in the square are all of the equal lines. They come together to form 4 right angles.
If we talk about a circle which is another shape of geometry has no straight lines. It is rather a combination of curves that are all linked. In a circle, there is no angle to be found.
Rectangle
Similar to a square, a rectangle is also created by linking four line segments. However, there is only a difference between a square and a rectangle. In addition a rectangle, has two line segments which are longer than the other two line segments. So, in geometry, a rectangle is also called as an elongated square.
Triangle
Triangle comprises three linked line segments.
Unlike, a square, in a triangle, the angles can be of distinct measurements. They aren’t always the right angles. Triangles are called, depending upon the type of angles which is found within the triangle itself. For example, if a triangle has one right angle, it will be known as a right-angled triangle.
However, in case all the angles of a triangle are less than 90 degrees, it will be named as an acute-angled triangle. If any, one of the angles in the triangle measures more than 90 degrees, then it will be known as an obtuse angled triangle. Finally, there is an equiangular triangle, in which all the angles of the triangle are 60 degrees. On the other hand, the triangle can also be identified or labeled on the type of sides they have. A scalene triangle has no congruent sides. An isosceles triangle has two congruent sides. An equilateral triangle has three congruent sides.
Shapes and Their Names, Definition and Examples with Pictures
Shapes and Their Names, Definition and Examples with Pictures
Table of Contents
Shapes Names in English
It is very important how there is a similarity or difference between the shapes of the corner zone and the basket backboard.
While there is an opening in the shape of the corner zone in football, the shape of the basketball backboard is completely closed. From here, it can be said that the shapes can be open or closed. We will cover the ‘shapes names’ in detail by giving example shapes to these situations below. Closed shapes created with straight and curved lines are geometric shapes.
Here are Lines Names in English
Some of the geometric shapes have special names. Triangle, square, rectangle and circle are the most well-known geometric shapes. Let’s take a closer look at the shapes names in English:
The triangle is a closed geometric shape that is formed by joining three straight lines. Many shapes that we encounter are generally triangular. The triangle has three corners and three edges. The filled state of the triangle is the triangular region. The triangular zone consists of the inner zone of the triangle and itself.
- The teacher explained information about the triangle in our first lesson, but our classmates did not understand.
A square is a closed geometric shape created by joining four lines of equal length. The square has four corners and four edges. All of its sides are of equal length. The full version of the square is in the square region. The square region consists of the inner region of the square and itself.
- They made our house big square.
The rectangle is a closed geometric shape, formed by joining four lines of equal length. The rectangle has four corners and four edges. The opposite edge lengths are equal. The inside of the rectangle is filled with a rectangular region. The rectangular region consists of the interior of the rectangle and itself.
- Many students are unable to make rectangular questions in geometry class.
You can see many circle and circle models around you.
The basketball backboard circle is in the shape of a coin circle. The circle and circle have no edges or corners. This is the most important feature that distinguishes the circle and circle from other geometric shapes.
- Basketball crucibles are typically made in a circle.
It is a geometric object whose all sides are a square area. The cube with all the same faces is a special prism. All edge lengths of the cube are equal. Each of the co-square regions here is one side of the cube. A cube has 12 sides, 8 corners and 6 surfaces. The cube shape can have many different expansions. There are 6 quadrangular regions in its expansion. The four different aspects of the cube are generally explained in the lectures.
- My brother Marry had a lot of difficulty because he couldn’t draw a cube.
It is a geometric object with all sides in the shape of a rectangular region. The rectangular prism is formed by combining two of three different rectangular regions.
The opposite faces of the rectangular prism are identical. The details of a prism of rectangles are of different length, width, length and height. Details in orange are the height of the prism. A rectangular prism has 12 sides, 8 corners and 6 surfaces.
- They designed the football field in the school garden as a rectangular prism.
It is a prism consisting of the upper and lower surfaces of the square areas and the sides of the rectangular areas. The shape of many milk and juice boxes around us is in square prism model. Navy blue colored edges are the height of the prism. The orange edges are the base edges of the prism. In prisms, heights are the edges that merge the upper and lower soles with their exact meaning. A square prism has 12 sides, 8 corners and 6 surfaces.
- The square prism shaped milk carton became indispensable for our handicraft assignments.
It is a prism whose upper and lower surfaces consist of co-triangular regions and its side faces are rectangular regions.
Unlike other prisms, the triangular prism has 6 corners, 9 divisions and 5 surfaces.
- According to many experts, the Egyptian Pyramids are made in the form of a triangular prism.
It is a geometric object whose top and bottom surfaces are equidistant and the sides are curved. The opening of the cylinder has two identical circles and a rectangular region. The roller has no separate and corner.
- He never liked items that were cylinders.
It is a geometric object that has no opening, separation and corner. Ball and ball are spherical models. There is a circle slice and a circle at the opening of the cone.
- The world is not exactly sphere or oval.
Cone has no corner and detail. New year hats are cone model.
- My grandfather bought many cone shaped hats and chips with him in the new year.
It is a triangle with side lengths equal.
Their internal angles are also 60 degrees each. The lowered height is also the bisector, the edge of the corner and the edge center post.
- Tomas agreed with a private teacher to learn the equilateral triangle lesson.
A rhombus in geometry is a square of four sides of equal length. The rhombus tile seen on playing cards, the pills of this shape are lozenges, the baseball playing field with this shape is called diamonds. Each rhombus is a parallel edge and the right angle is a square.
- For us, the rhombus was the easiest to draw.
Closed shapes formed by segments of lines that combine any three non-linear infinite points two by two into the plane. Polygons created by joining infinite points are called ngenes. It is called a triangle, a rectangle. Polygons have as many corners as the number of edges.
- Polygon is a very difficult subject to understand.
In the schools, many questions are not asked about geometry subjects such as trapezoid, trapezoid area and perimeter, trapezoid and trapezoid.
In general, we already know that there are a small number of questions from all subjects of the geometry lesson. It is not possible to predict which title will be raised from the geometry issues. Therefore, we need to know trapezoid and related subheadings.
- I could not understand the trapezoid issue described in the last lesson.
A hexagon is a polygon with six edges and six corners. It is also called a smooth hexagon if its edges and internal angles are equal. The internal angles of the smooth hexagon are each 120 °. Since it consists of six hexagonal triangles, its area and perimeter can be easily found.
- A historical building had a hexagonal structure.
An octagon is a polygon with eight sides and 20 diagonals. The total of the internal angles: degrees. An inside angle becomes degrees. The sum of the external angles: degrees. An outer angle becomes degrees.
- After an octagonal apartment building I have seen before, I am not surprised at any other building.
An oval is a closed curve in a plane that is very similar to the outline of an egg. The term is not very specific, but in some regions a more precise definition is given, which may include one or two axes of symmetry. In common English, the term is used in a broader sense. For example, it can be used like any shape that reminds an egg.
- The egg is oval makes me very happy. Because oval shaped foods increase my appetite.
The parallelogram is a quadrilateral rectangular with equal sides and a total of 360 degrees. Their opposite edges are parallel and their length is equal.
- It is extremely easy to draw a parallelogram shape.
12 Female Figure Types and Clothing Choices • DRESS Magazine
12 Female Figure Types and Clothing Choices • DRESS MagazineFind:
DRESS Magazine > Choice > How to determine your body type and choose clothes according to it
Body type is a determining factor when choosing clothes, so knowing everything about your physique, strengths and weaknesses is a prerequisite for creating a stylish image.
We tell you what types of female figures are, how to identify and correct them with the help of clothing. nine0003
09/03/2022
Updated
#Choice
#Wardrobe Figure
Brands
Figure Type Calculator
Breast Waist Hips How to remove your dimensionsYour type of figure
here will be your type of figure
Circle
Type O, Apple, spoon
Triangle
Type A, pear
Sanding clock
Type x, eight, guitar
Inverted Triangle
type V, T
rectangle
type H, column, banana
Why are there 2 types of figure? - This is a normal situation. The type of figure is a rather conditional concept, not an exact one. That is, for some parameters there will be no type of figure at all, and some parameters may fall under 2 types of figure.
What to do about it? - Just keep in mind when choosing clothes that your body type can have signs of 2 types.
Most likely, one of them suits you more - and focus on it. nine0049
What can be a female figure
The standard, generally accepted classification of body types in women includes 5 varieties:
- Hourglass, type X, figure eight, guitar;
- Pear, triangle, type A;
- Apple, round, type O,
- Rectangle, banana, type H;
- Inverted triangle type V or T.
ADVERTISING - CONTINUED BELOW
An hourglass is the benchmark and fits the standards of beauty - it is to this type that they try to bring all other types closer with the help of visual correction. nine0003
How to determine the type of a girl's figure
To determine what type your figure belongs to, take measurements:
- Breasts - in the most convex part of the chest;
- Waist - the narrowest part of the torso;
- Hips is the widest part of the hips.
Based on the results obtained, or rather the difference between measurements, the type of female figure is determined.
To determine your type, you can use our figure type calculator above.
In addition to the classic classification, there are also various transitional or additional types. An extended list of varieties was developed by fashion consultants from Britain - Trina and Susanna. It all comes down to the same basic types, but allows you to take into account the unique characteristics of different girls.
ADVERTISING - CONTINUED BELOW
Total in the extended classification 12 types of figures , three of which - pear, apple and hourglass coincide with the basic list, and the rest are their subspecies:
- Pear - additional: pin, bell;
- Hourglass - cello, vase;
- Rectangle - column, briquette;
- Inverted triangle - lollipop, cone, glass;
- Apple - no subspecies.
Next, we will consider the main types of figures, as well as additional ones according to the extended classification, and give advice on choosing clothes. nine0003
Hourglass
An hourglass or X-shaped figure can also be found under the names guitar and figure eight. It is characterized by an expressive waist, which is very different in girth from the hips and chest. The measurements of the chest and the femoral zone in this case are approximately equal, and the narrowest part of the torso is 20-30 centimeters smaller or no more than 70% of the hips.
Despite the standard of this type, the hourglass does not always fit the parameters 90-60-90 - this variety is equally common in both slender and curvy girls. When formatting a wardrobe, it is important to emphasize the curves of the figure, while not violating the proportions of the top and bottom.
Hourglass-shaped clothes are almost everything you can find in stores, but look best:
- Dresses - fitted with a V-neck or round neckline;
ADVERTISING - CONTINUED BELOW
- Skirts - pencil, trapeze, sun;
- High and mid-rise trousers and jeans ;
- Clothing with belts and belts - looks great with a down jacket or coat with a tied belt or a wrap dress that emphasizes the waist;
- Slim fit .
.jpg)
With this type of figure, it is better to refuse baggy clothes - they will hide the silhouette, and no one will know that you have a proportional beautiful figure. Also, be careful with low-rise items - trousers, shorts, skirts, as they violate the proportions of the top and bottom. nine0003
Not the best choice would be an outfit with a straight cut - be it a dress or a coat. Things like that turn an hourglass into a rectangle.
If you are the owner of the hourglass type and curvaceous at the same time, we recommend that you give up too tight outfits - things should also be fitted, but not completely fit the body. Leave the idea of layering - in this case, it will only visually increase the excess weight.
Additional hourglass types are:
- Cello;
- Vase.
Cello
Cello - these are girls with the same balanced hips and breasts, and an expressive waist, but the waist itself is short.
Often these are women of short stature with short shins.
The task of girls with a cello figure is to visually stretch the figure. This will help outfits with V-necks, dresses, shirts and coats with three-quarter sleeves, flared skirts to the bottom. Do not forget about heels - it is better to choose shoes with wedges, and not with stilettos. nine0003
Vase
The vase body type is characterized by large breasts, appetizing hips and an expressive waist. The main difference from the hourglass is that the hips and legs are sleeker, slimmer. Choosing clothes with a vase body type is much easier.
ADVERTISING - CONTINUED BELOW
Plunging necklines are perfect, tight-fitting outfits, fitted jackets and blazers are welcome.
Pear
The pear, triangle or A-shaped body type is characterized by narrow shoulders and waist, which are combined with attractive, expressive hips. Contrary to the misconception, men consider the pear, and not the hourglass, to be the sexiest and most attractive - all this is due to the wide pelvis, which, from the point of view of the continuation of offspring, is much more suitable than everyone else.
nine0003
Strengths of A-shaped girls:
- Often thin waist;
- Beautiful, rounded hips;
- Graceful shoulders, beautiful arms, collarbones, neck.
Weaknesses:
- "Heavy" hips - visually the bottom looks much more massive, heavier than the top;
- Short legs. According to measurements, they can be quite long, but due to the volume in the femoral zone, the length of the legs is “hidden”. nine0099
- Balance top and bottom - make the shoulders visually wider;
- Visually "cut" the hips, that is, make them a little narrower and visually stretch to give the legs length;
- Accentuate the waist.
- Tops, T-shirts, blouses, jackets with bare shoulders. Sleeveless clothing is also suitable; nine0064
- A-line skirts.
Sometimes it is advised to wear a pencil, but if the girl is curvy, this style of skirt will only emphasize the roundness of the hips; - Straight or flared jeans and trousers, full length. You should not wear tight-fitting models of trousers, as well as cropped ones - they will “cut off” your legs.
- Belts and waistbands on the hips - they emphasize their width, and the difference between top and bottom becomes even more obvious; nine0064
- Turtlenecks. Tight clothing in the upper body emphasizes the slimness of the waist and the grace of the shoulders, but in this case there is a strong contrast with the massive bottom;
- Straight-cut clothing - both outerwear and underwear. A straight cut makes the pear voluminous, but shapeless;
- Trousers, skirts, shorts, richly decorated in the pockets and waist area. Rhinestones, embroidery, ruffles, drapery - all this will further increase the hips.
- Size;
- Bell.
- The proportions of the body are not violated, that there is a top and bottom looks harmonious; nine0064
- Long legs;
- As a rule, lush breasts.
- Weakly defined waist or its complete absence;
- Hands are usually thin in the forearm area, but the closer the shoulder, the more massive they become;
- Broad chest and back;
- Small buttocks.
- Dresses that widen to the bottom - A-line or A-line. They do not weigh down the already large top and hide the roundness of the figure. Asymmetrical models with an interesting hem are also suitable;
- V-neck blouses, tops, shirts, T-shirts. The figure of an apple is often accompanied by a short neck, and just such a neckline will help to visually lengthen it; nine0064
- Trousers and jeans with trim in the pockets and waist - embroideries, pleats, voluminous pockets balance the massive top and slender legs.
- Extremes - a very tight silhouette or vice versa, baggy oversized; nine0064
- Tops, blouses, shirts with accents at the neck or shoulders - ties, voluminous sleeves or sleeveless clothes will only increase the already wide shoulders and massive arms;
- Crop tops - the absence of a waist will only become more noticeable. Turtlenecks will work the same way;
- Clothes with trim in the belly area - this is often a problem area for an apple, so there is no need to focus on it;
- Pencil skirt and other tight cuts that highlight the difference between the top and legs. nine0064
- Proportional top and bottom;
- Slim legs;
- Graceful shoulders and collarbones.
- Tops, shirts, blouses that draw attention to the upper part. These can be models with thin straps or fashionable lantern sleeves; nine0064
- Skirts - A-line, sun, and models with slits, the height of which is limited only by your modesty;
- Fitted jeans and trousers.
Girls with a rectangular body type can safely wear low-rise trousers, although the middle one remains a classic; - Cropped trousers, as well as classic models borrowed from business style;
- Blazers, cardigans, shirt-jackets with straight shoulders;
- Outerwear - coats, down jackets, fur coats with a belt. nine0064
- Tops, shirts with an open belly, and dresses with cutouts in this area. If there is no waist or it is weakly expressed, you should not focus on it;
- Straight cut clothes - dresses, tunics, down jackets, coats. Such outfits will do absolutely nothing - the rectangle will remain angular and without bends; nine0064
- Turtlenecks. A very capricious thing that generally suits few people - it will emphasize the absence of a waist.
- Column;
- Briquette.
- Narrow hips and flat buttocks;
- Massive top - chest, shoulders. At the same time, the size of the breast can be any - here it is the chest that gives volume;
- Ill-defined waist.
- Straight fit. A knee-length straight-cut dress or coat hides narrow buckets and makes them visually the same as the shoulders. A trapezoid is also perfect;
- Low rise trousers. The inverted triangle is perhaps the only type of female figure that really suits low jeans;
- Dresses, jackets and tops with a peplum below the waist - they add the missing volume to the bottom; nine0064
- Bottom - skirts, shorts, trousers, jeans with additional volume in the waist area and at the pockets. It can be stripes, trim, folds - everything that makes the bottom look bigger.
- Coats and dresses that are too long and straight;
- Boat neck tops, sweaters and dresses - this visually adds massiveness to the top;
- Bulky top - hoodies, sweaters, oversized sweatshirts will contrast strongly with long legs and narrow hips; nine0064
- Tops, shirts, blouses, jackets with puffed sleeves, frills and other voluminous accents at the top;
- Maxi length skirts.
- Lollipop;
- Glass;
- Cone.
-
On the Insert tab, click the Shapes button.
-
Select the shape, click anywhere on the Stage, and then drag the pointer to draw the shape you want. nine0003
To create a square or circle (or constrain the size of other shapes), hold down the SHIFT key while dragging.
-
In an open report, on the tab Design , click the button Shapes .
-
Select the shape, click anywhere on the Stage, and then drag the pointer to draw the shape you want.
To create a square or circle (or constrain the size of other shapes), hold down the SHIFT key while dragging. nine0003
-
Right-click the shape and select Add Text or Edit Text or just start typing.
Note: The added text will become part of the shape - rotating or flipping the shape will rotate and reflect the text accordingly. nine0003
-
To change the text formatting and align it, on the tab Main select the necessary options in the groups Font , Paragraph and Alignment , depending on the program you are using and the desired formatting. (Project has limited text formatting options.)
-
Click the shape you want to change.
To edit multiple shapes, hold down the CTRL key while clicking them one by one.
-
On tab Format in group Insert shapes click the Edit Shape button, select Edit Shape and click the new shape.
-
On the Insert tab, click the Shapes button.
-
Right-click the shape you want to add and select Lock drawing mode .
nine0637 -
Repeat step 3 to add as many shapes as needed.
Tip: To get a square or circle (or constrain the size of other shapes), hold down the SHIFT key while dragging.
nine0064
-
After adding all the desired shapes, press the ESC key to turn off the lock drawing mode.
-
Select the text in the shape to which you want to add bullets or numbering. nine0003
-
Click the Home tab on the ribbon, and in the Paragraph group, select Bullets or Numbering .
To display different bullet styles and numbering formats, click the arrow next to the Bullets or Numbering button.
nine0073 -
Click the shape you want to change.
-
Change to tab Format and in the group Shape Styles select the desired quick style.
To see the rest of the Quick Styles, click the More Options button.
-
On the Insert tab, click the Shapes button.
-
Select the shape, click anywhere on the Stage, and then drag the pointer to draw the shape you want.
nine0073 -
Right-click the shape and select Add Text or Edit Text or just click inside the shape and start typing.
Note: The added text will become part of the shape: rotating or flipping the shape will rotate and reflect the text accordingly.
nine0064
-
To format and align text, go to the Home tab and select the available formatting options. For example, you can change the font color, styles, sizes, alignment or indentation, change the text orientation, to name a few.
- nine0002 Click the shape you want to change.
To edit multiple shapes, press while clicking the shapes you want to edit.
-
On the Format Shape tab, click , point to Edit Shape , and select the desired object.
-
Select the shape to be copied.
-
Press the OPTION key and drag the shape to the desired location. Release the mouse and create a copy of the shape. The shape can be dragged and released as many times as needed.
-
Select the text in the shape to which you want to add bullets or numbering.
-
On the Home tab , click the arrow next to the Bullets or Numbering field.
nine0064 -
Press the Enter key each time a new bullet or number is required, or press the Enter key twice to end the list.
-
Click the shape you want to change.
- nine0002 Click the Format Shape tab and select the desired style from the Styles Gallery.
To see more styles, click below the style gallery.
-
Click the shape you want to change.
nine0637 -
Do one of the following:
-
To change the fill color, under Theme Colors or Standard Colors , select the desired color. nine0003
-
To remove the color of the selected chart element, select No fill .
-
To use a fill color that is not in Theme Colors or Standard Colors , click Other Fill Colors . In dialog box Colors select the desired color and press the button OK .
-
To use a picture to fill the shape, select Picture . In the Insert Picture dialog box, click the desired image and click the Insert button.
- nine0002 To apply a gradient effect to the selected fill color, click Gradient , and then choose an appropriate gradient style.
To set additional gradient styles, click Other gradients, and then in the Format Chart Area area, under Fill , select the gradient options you want.
- nine0002 To use a fill texture, click Texture , and then select the appropriate texture.
-
-
Click the shape and click the Format Shape tab.
- nine0002 In the Shape Styles group, click Shape Effects , point to the effect category, and then select the effect you want.
-
On the Format Shape tab, click Format Area .
nine0003 -
In the Shape Format area, click the Fill & Line tab, and then choose Fill or Line .
-
Drag slider Transparency to achieve the desired effect.
-
On the Insert tab, select Shapes .
-
Select the desired shape from the drop-down collection.
The default shape is immediately inserted in the middle of the visible page.
nine0637 -
To move a shape, move the mouse pointer over it until the pointer changes to a four-headed arrow. Then click and drag the shape to move the shape to the desired location. nine0003
When you select a shape in a document, a tab appears on the toolbar ribbon Shape . It contains buttons for shape actions, such as adding a fill or outline color, or selecting a predefined shape style.
Note: If the simplified ribbon is disabled, the tab name in step 4 is The format is . For more information about the simplified Ribbon, see The new look and feel of Microsoft 365.
-
Right-click the shape and select Edit Text .
A flashing cursor appears in the center of the figure.
nine0637 -
To format and align text, click the Home tab , and then select options in the Font , Paragraph , or Alignment groups.
-
Select the shape to be modified.
-
On the Shape tab (or on the Format tab if the simplified ribbon is off), open the Shape Style collection and select the quick style you want to use. nine0003
Click the down arrow at the end of the gallery to open it and view the full list of options:
You can hover over an option in the gallery to see a short description of it.
-
Select the shape to be modified.
nine0003 -
On the Shape tab (or on the Format tab if the simplified ribbon is off), click the down arrow next to the Fill field to open the gallery of fill colors.
-
Select a color.
nine0637
When choosing clothes for girls with a pear figure, it is important to know the goals they pursue:
Clothing for pear shape:
What to skip:
Baggy oversized clothes are strictly forbidden for large girls.
Volumetric outfits will not hide the imperfections of the appearance, but on the contrary, they will emphasize the volume and all the shortcomings. nine0003
ADVERTISING - CONTINUED BELOW
Additional types of figure:
Skittles
Skittles are characterized by a medium chest, well-defined waist and large hips. The legs are usually short and full. If for a pear the main problem is the buttocks, then for the skittles - massive hips.
Choose clothes with vertical lines, use high heels to elongate your legs. Add details to the neckline - choose a beautiful voluminous necklace, blouse or top with an unusual neckline. nine0003
It is worth refusing cropped trousers, as well as too tight-fitting models.
Bell
The bell figure has a small chest, the waist is thin, but very short. The entire volume is concentrated on the buttocks and hips, and the girl seems squat, low.
Pay attention to the accents in the area of the face and the upper part of the figure - almost all techniques are good here, from the use of massive jewelry to the jabot. Correcting a voluminous bottom is more difficult than a narrow top, so it’s better to pay attention to the upper body. nine0003
Avoid total looks in one color - they will emphasize all the features and highlight the imbalance between the top and bottom. Long jackets are not recommended - the legs will appear shorter.
Apple
Apple, circle or O-shaped figure - beautiful slender legs, moderately rounded hips with a fairly large waist and chest.
Strengths of the apple figure type:
Corrections require shortcomings of this type of figure:
Choosing the right clothes according to the apple figure should take into account slender legs - they need to be emphasized, as well as the neckline - it is important to demonstrate an attractive chest. The silhouette itself undergoes correction - visually it needs to be stretched. nine0003
ADVERTISING - CONTINUED BELOW
Successful clothes for apple body type:
If you choose clothes with a print, it should be a vertical stripe that perfectly copes with the visual correction of height and figure. If it’s not a vertical stripe, it means plain, basic things are best.
What to refuse:
Hide your tummy with the right choice of clothes - 10 ways with examples of application from DRESS.
Rectangle
Rectangle or H-shape features equal or approximate equal bust, waist and hip measurements. The chest and thigh area are approximately equal, and the waist is almost invisible.
The H-shaped figure is often perceived as flat, almost masculine, but this type is the easiest to correct - it is only important to correctly emphasize the waist and make it more expressive. It is from a rectangle that it is easiest to make an hourglass. nine0003
Strengths of the figure:
There is only one weak side of this type of figure - the absence of a waist, and this is what all correction techniques are aimed at.
What to wear with a rectangle figure:
Be sure to use belts and belts to visually narrow the waist. Straps today are used for dresses, jackets, down jackets, coats, raincoats - take advantage of this fashion trend.
Taboos for girls with rectangles:
As for oversize, it all depends on the purpose of choosing clothes. If you do not need to demonstrate your femininity and you just want a cozy tracksuit, then buy it. At the same time, keep in mind that the more voluminous the clothes, the less likely it is to adjust the silhouette. This applies to all varieties of female figures.
Rectangle can be unusual and there are additional classifications for this:
Column
Column is an elongated rectangle, which is distinguished by particularly long legs and overall slender silhouette. If the classic rectangle is usually identified with the male type, then the column is the boyish type of figure.
Clothing for a straight column figure is a semi-fitted or loose silhouette, accents at the waist with belts, elongated tops and blouses just below the hips. nine0003
Briquette
Briquette, in contrast to the column, is a more mundane, square figure.
If the rectangle and the column have a long waist, then the bracket has a short one, like the legs.
Choose clothes with drapes and V-necks.
Avoid square-shaped clothing - T-shirt, short jacket to the hip line, short coats.
Inverted Triangle
Inverted Triangle, V-shaped or T-shaped figure - it's all about wide shoulders and chest line and narrow hips. The waist is usually not traced, since the necessary "bulge" of the hips is not inherent in the inverted triangle. nine0003
The main advantage of the inverted triangle is slender legs, which are often longer, or at least look like that, than those of other types.
Faults:
Inverted Triangle Wardrobe - these are outfits that visually reduce the shoulders and increase the hips, as well as emphasize the waist.
nine0003
V-shaped clothing:
Do not wear:
There are three additional types for the inverted triangle:
Lollipop
Lollipop, like the triangle, has volume concentrated in the upper part, but the difference between the hips and shoulders is more pronounced. The lollipop is accompanied by long slender legs and a missing waist, the width of which almost coincides with the girth of the hips. nine0003
When choosing clothes, it is important to expand the hips and visually add curves that the figure lacks. Pay attention to cutouts - a deep neckline will help reduce the difference with the bottom. Wear draped skirts and dresses, vests, coats with wide lapels.
Give up clothes that lengthen the legs - the proportions will become even more contradictory. Do not wear turtlenecks and generally avoid dresses with a closed neck - this will emphasize the chest, which is already difficult to miss. High-waisted trousers and a vertical stripe print are also not recommended.
nine0003
Glass
The glass is characterized by even broader shoulders and a larger chest, with a medium to large build. The hips are traditionally narrow, the legs are slender, but less long than in the lollipop type. The waist is absent and is almost in line with the hips.
The recommendations for the glass are the same - don't be afraid to show your breasts and add volume to the bottom, and forget about ways to become visually taller and slimmer - even with an average height, there is no point in stretching the silhouette in this case. nine0003
Cone
The cone is almost identical to the classic inverted triangle - from broad shoulders the torso gradually narrows, passing into narrow hips. You need to follow the same recommendations in choosing clothes as for the basic type.
Guide to body shaping with clothes - principles of making bows from DRESS.
Did you manage to determine your body type? Write in the comments about which figure to tell in more detail?
Write your opinion
AD - CONTINUED BELOW
SHARE WITH YOUR FRIENDS!
More about styles
Brands and fashion houses
The measuring tape should always be strictly horizontal and fit to the body without tightening it.
Bust - measured under the bust, passing the tape under the arms in its widest part.
Waist - the measuring tape should be drawn horizontally around the body at the level of the narrowest part of the belt. nine0003
Hip circumference - measured at the most protruding points of the hips and buttocks.
Inseam length is the measurement from the topmost inside of the thigh to the bottom of the ankle. You can take this measurement from trousers that fit you very well.
CLOSE WINDOW
Choice of clothes and style. How to dress elegantly and fashionably. Fashion trends and wardrobe ideas from the best designers, stylists and fashion designers.
Business in the field of clothing, fashion and style - how to start and develop. nine0003
We are in social networks
Our projects
© 2020-2022 dress-mag.com
All rights reserved.
Full copying of materials is prohibited. Partial use is permitted only with an active link to the source.
Adding shapes - Microsoft Support
You can add shapes, such as rectangles, circles, and arrows, to your documents, email messages, slideshows, and spreadsheets. To add a shape, on tab Insert click the Shapes button , select a shape, and then click and drag to draw it.
After inserting one or more shapes, you can add text, bullets, or numbering to them, and change the fill and outline, or apply other effects available on the Format tab.
Tip: You can add individual shapes to a chart or shapes on top of a SmartArt graphic to customize a chart or picture. nine0003
Add a shape to Excel, Outlook, Word, or PowerPoint
You must open or create a report before proceeding further. To do this, on the tab Report , click the button Latest to open an existing report, or select the command Other reports to open the dialog box Reports select an available report or create a new one.
Insert or click a shape and enter text.
Note: These commands are not available in Project.
If you want to add the same shape to your document multiple times, you can quickly do so with the Lock Drawing Mode command.
Note: Instead of adding individual shapes, you might need to select a SmartArt graphic to create a document. In a SmartArt graphic, the position of the shapes and the font size in those shapes are updated automatically when you add or remove shapes and change text. nine0003
Click anywhere on the Stage, and then drag the pointer to draw a shape.
Note: This feature is not available in Project.
Quick Styles let you apply a style to a shape with one click. You'll find them in the Quick Styles collection. If you hover over the Quick Style thumbnail, you can see how it affects the shape.
To change the fill, border, and text color, see Change the colors of a text box or shape.
Click the shape you want to delete, and then press the DELETE key. To delete multiple shapes, hold down the CTRL key while clicking them one by one, and then press the DELETE key.
See also
Draw and delete lines, connectors, or shapes with polylines
nine0002 Rotate a text box, shape, WordArt, or pictureChange the colors of a text box or shape
Draw a decorative line in Word or Outlook
Selecting a SmartArt graphic nine0003
Create a chart from start to finish
Adding pictures to a file
Drawing notes on a page
Once a shape has been added to a document, it can be modified by adding connector lines, changing the style, adding a mirror image, changing the color, and applying various other effects such as shadows, glow, and 3D.
nine0003
Add figure
Note: Adding lists is not available in Excel 2016 for Mac.
Click the Format Shape tab and click (shape fill icon ).
Click the shape you want to delete, and then press the DELETE key. To delete multiple shapes, press the COMMAND key by clicking the shapes you want to delete, and then click the Delete button.
nine0024 See alsoResizing an object
Cropping a picture
Move, rotate, and group a picture, text box, and other objects
Align objects in Word for Mac nine0003
Grouping and ungrouping objects
Shapes such as rectangles, circles, and arrows can be added to books and presentations.
(Word for the web does not support shapes.) To add a shape, click the Insert button on the ribbon, select Shapes , and then select the shape.
After adding a shape, you can move it and resize it; adding text, bullets or numbers; and you can change the fill color or outline. nine0003
Select the sizing handle around the shape's perimeter and drag the shape in or out to resize the shape.
To create a square or circle (or constrain the size of other shapes), hold down the SHIFT key while dragging.
Insert a shape or click an existing shape and then enter text like this:
Enter the text to add to the shape.
To make the shape transparent, select No fill at the bottom of the color gallery.
